Trixbox
Below are the configuration Instructions for the FreePBX portion of the Trixbox.
Junction Networks recommends creating both a SIP and IAX trunk. Then, you have flexibility and redundancy in your dial plan.
Create a SIP Trunk
The first thing to do is to login to your Trixbox. You should log in a user "maint".
Now select the the "FreePBX" selection under the Asterisk menu option.
From here choose "Setup" from the menus in the middle of the screen.
From the "Setup" menu choose "Trunks" and then choose "Add SIP Trunk". Create a SIP Trunk.
Outgoing Settings
Trunk Name = junction context=from-pstn fromdomain=jnctn.net host=sip.jnctn.net insecure=very username=your_username secret=your_password type=peer
Incoming Settings
Leave Incoming Settings blank for SIP Registration String: your_username:your_password@sip.jnctn.net
Click "Submit". Your SIP trunk is now complete. On to your IAX trunk.
Create a IAX Trunk
Outgoing Calls
Now select the "Asterisk Management Portal". You should see the following screen:
From here choose "Setup" from the menus in the middle of the screen.
From the "Setup" menu choose "Trunks" and then choose "Add IAX2 Trunk".
1.) Caller ID: Under "General Setting" put in your Caller ID. The format is:
"Name" <phone number>
No information is needed under "Outgoing Dialing Rules".
2.) Outgoing Settings:
Enter the following in the Outgoing Settings box:
host=iax.jnctn.net secret=your_password type=peer username=your_username
Be sure to replace "your_password" and "your_username" is your VOIP password and username from Junction Networks. Name the trunk "junction".
3.) Submit Changes. From the bottom of the page choose "Submit Changes".
4.) From the "Setup" menu, choose "Outbound Routes". Make the "junction" trunk your sequence "0" (zero) trunk under the "Outside" route.
**
Important - We are expecting a "1" before the number.
When dialing, be sure to dial 1-Nxx-Nxx-xxxx.
**
Incoming Calls
Follow the instructions for "Outgoing Calls". Make sure you can make calls.
1.) We use RSA keys for authentication purposes. You will need to SSH to your box and go to a command line. This step is very important. Without our RSA keys, you will not be able to receive calls.
From the command prompt enter the following:
cd /var/lib/asterisk/keys wget http://www.jnctn.com/jnctn.pub
2.) Incoming Settings:
From the Setup menu, choose "Setup". Choose the "Trunk IAX2/junction" trunk.
Enter the following in the Incoming Settings box:
auth=rsa context=from-pstn inkeys=jnctn type=user
Name the trunk "jnctn".
***
For Trixbox users using SIP protocol, leave the Incoming Settings box and name completely blank.
***
3.) Registration:
Enter the follwoing into the Registration box:
your_username:your_password@iax.jnctn.net
Be sure to replace "your_password" and "your_username" is your VOIP password and username from Junction Networks. From the bottom of the page choose "Submit Changes".
4.) Setup DID:
In the "Setup" menu, choose "Inbound Routes". Choose "Add Did". Enter the phone number you were given by Junction Networks. Be sure to add all 11 digits plus the "1". For example, if your DID is , you would enter:
12125551234
Congratulations. You should now be able to make and receive calls from Junction Networks!
