Switchvox
Below are the configuration instructions for Switchvox.
First log into the Admin Portal.
1. Navigate to SYSTEM SETUP >> SIP PROVIDERS.
2. Select ADD New SIP Provider.
3. Input the following information:
SIP Provider Name= Junction Networks Your Account ID= your_Username Your Password= your_Password Hostname/IP Address= sip.jnctn.net Callback Extension= Switchvox_extension DTMF Mode= RFC2833
Be sure to replace "your_username" and "your_password" with your Junction Networks SIP username and password.
Here is an example of what the settings should look like:
***Select "Click to Open Advanced Settings"*****
You must add Caller ID Name and Number information:
Caller ID Name= (whatever you choose) Caller ID Number= (any valid 10-digit number)
Caller ID Number must be a valid 10-digit number for the service to work.
Here is an example of what the advanced settings should look like:
Or choose Add New IAX Provider
4. Select Add New SIP Provider
5. Before you can use the service, you need to first establish your Outgoing Calls settings. Navigate to SYSTEM SETUP >> OUTGOING CALLS.
6. Select Add New Rule
7. Input the following information:
Rule Name= Junction Networks Is this rule final= yes Number begins with the digits= 91 The rest of the numbers must be between= 10 and 10 digits Before connecting the call, trim= 1 digit from the front, and prepend= No digits to the number (leave blank) Call Through= SIP Provider SIP Provider= Junction Networks
This is what the outgoing rule should look like:
8. Select Add outgoing rule
CONGRATULATIONS! You should now be ready to make and receive calls from Junction Networks.
