Polycom Digit Map - Prepend Area Code

To prepend an area code to a dialed number, you would use the 'R' (replace) command in the Polycom Digitmap field. For example:

For Polycom SoundPoint IP phones, sip software 2.1 or later (tested varies versions up to 3.0.2.0972)

Substitute 615 for your area code in the following examples.

For systems with 4 Digit Extensions, as long as the extensions start with a 2,3,4,5,6, or 7.

RR1615Rxxxxxxx|RR1Rxxxxxxxxxx|[2-9]11|0T|011xxx.T|[0-1][2-9]xxxxxxxxx|[2-9]xxxxxxxxx|[2-9]xxxT|[2-3]xxx|

Enter the following under "Digit Map Timeout"
2|2|2|3|3|3|3|2|3

For systems with 3 Digit Extensions, as long as the extensions start with a 2,3,4,5,6, or 7.

RR1615Rxxxxxxx|RR1Rxxxxxxxxxx|[2-9]11|0T|011xxx.T|[0-1][2-9]xxxxxxxxx|[2-9]xxxxxxxxx|[2-9]xxxT|[2-7]xx|

Enter the following under "Digit Map Timeout"
2|2|2|3|3|3|3|2|3

(Thanks Matt!)