Nokia N80 and E61

SIP on a Nokia E61 and N80i

The procedure to configure the E61 or N80i with a Junction account has two steps:

1. Configure a SIP Account
2. Create a profile for the Internet Telephone

Note: While it depends on the circumstances, because of NAT issues I would only recommend using these phones with Junction's SIP Hosted and Hosted PBX service. The configuration info that follows is consistenant with this recommendation.

----------------------------------------------------------------------------------------
Step 0 of 2: Upgrade firmware if needed

The first thing I did was upgrade the firmware - see http://europe.nokia.com
Find your current software version by entering *#0000# on your phone's keypad.

E61 version: 3.0633.09.04
N80i version: 4.0632.0.38

----------------------------------------------------------------------------------------
Step 1 of 2: Configure a SIP Account

Menu -> Tools -> Settings -> Connection -> SIP settings

Now add a new SIP profile: Options->Add new

You can call it Junction, for example...

Profile Name: Junction
Service Profile: IETF
Default Access point: None (or select the access point that will be used)
Public user name: sip:user@yourorg.onsip.com <-- where this is your SIP address
Use Compression: No
Registration: When needed
Use Security: No
Proxy Server
- Proxy server address: None
- Realm: None
- User Name: None
- Password: None
- Allow loose routing: Yes
- Transport type: Auto
- Port: 5060
Registrar Server
- Registrar server address: sip:junction.onsip.com
- Realm: jnctn.net
- User Name: authusername <-- where this is the authentication username for your SIP address
- Password: yourpassword <-- where this is the password for your authentication username
- Transport Type: Auto
- Port: 5060

The SIP account is now ready.

----------------------------------------------------------------------------------------
Step 2 of 2: Create a profile for Internet Telephone

Menu -> Tools -> Settings -> Connection -> Internet Tel. -> Options -> New profile

Name: Junction Networks
SIP profiles: Junction

----------------------------------------------------------------------------------------
To Connect

Now when you want to use VoIP, you have to register to the service:

E61 version: 3.0633.09.04
Menu -> Connectivity -> Internet Tel
- Select access point to use to create connection

N80i version: 4.0632.0.38
Menu -> Internet -> Internet Tel
- Select access point to use to create connection

The phone will try to register to the Junction server.
Once the registration is complete, you'll be able to make calls (select Internet call in the Call menu).

----------------------------------------------------------------------------------------
To Disconnect

Menu -> Connectivity -> Connection Manager -> Active Data Connection -> Options -> Disconnect