Linksys WIP 300 Phone Configuration

Log into the WWW interface for the Phone. Under the "SIP" tab use the following settings:

(Prior to Firmware 1.02.12S)
Phone Number = Username
Authentication ID = Auth Username
Authentication Password = VOIP Password
SIP Domain = Domain e.g. your-domain.onsip.com
Proxy Address and Outbound address = sip.onsip.com

Go back to the "Network Profile" tab and setup the "Default" profile with your wireless network - and make sure to select your new SIP Account Choice at the bottom of the screen.

(After Firmware 1.02.12S)
Under "SIP Proxy Setup"
SIP URL = username
SIP Proxy = sip.onsip.com (or your-domain.onsip.com)
SIP Proxy Port: 5060
Registrar Address: your-domain.onsip.com
Registrar Port: 5060
Expiry Time: 3600
Session Timer: 0
Display Name: None
SIP Format: Normail
Outbound Proxy: sip.onsip.com
Outbound Proxy Port: 5060
Registrar Name: auth username
Registrar Password: auth password

Save Settings